When the vibrating screen is started, sometimes it cannot be started properly. The following is to give you an analysis of the reason and solutions:

1. The voltage required by the vibrating screen is 380v three-phase power, please make sure that you use a three-phase power supply

2. Motor is damaged, need to replace the motor

3. Electrical components in the control line are damaged and need to be replaced

4. Voltage shortage can be solved by changing the power supply

5. Too much bulk material are accumulated on the mesh, need to be cleaned

6. Vibrator failure, you can repair the vibrator to eliminate the fault

7. The grease in the vibrator thickens and agglomerates, so it is necessary to clean the vibrator, update and add the appropriate grease