banner
Why the vibrating screen cannot be started properly?
Mar 30, 2020

When the vibrating screen is started, sometimes it cannot be started properly. The following is to give you an analysis of the reason and solutions:

1. The voltage required by the vibrating screen is 380v three-phase power, please make sure that you use a three-phase power supply

2. Motor is damaged, need to replace the motor

3. Electrical components in the control line are damaged and need to be replaced

4. Voltage shortage can be solved by changing the power supply

5. Too much bulk material are accumulated on the mesh, need to be cleaned

6. Vibrator failure, you can repair the vibrator to eliminate the fault

7. The grease in the vibrator thickens and agglomerates, so it is necessary to clean the vibrator, update and add the appropriate grease

Standard or Custom Bulk material
What is better for your project?

call us :

+86 18601767509
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
copyright © 2024 Anhui VRV industrial technology co.,ltd..all rights reserved. powered by dyyseo.com /
ipv6 network supportedipv6 network supported
Leave a message
VRV
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact